Lamber Heat Exchanger-9KW

Save up to 50-60% of your energy cost
Features:
Energy regeneration with Lamber washing systems
The intelligent heat regeneration
The system exploits the heat produced in the cooling cycle, which allows to constantly regenerate energy from the hot air produced in the machine, to preheat the rinsing water.
This device allows to feed the machine with cold water, so as to save a lot of energy (at least 15.5 Kw).
The extracted air is so cooled and dehumidified that it can be fed back into the working room thus improving considerably the ambient condition of the dishwashing area.
The output air temperature is in fact nearly 18°-22° C.
Besides the saving about the washing system,there is also one concerning the additional costs for a connection to a ventilation/extraction system in the dishwashing area to create optimum working conditions.
The system exploits the functioning principle of the Heat Pump to heat the rinsing water.
The hot air and the steam which come out from the machine are sucked by the pipe coil and give their heat to the water that flows in the pipes.
Then the water goes through a heat exchanger, part of the cooling cycle fed by the Heat Pump.
This plate-type exchanger gives the heat to the water that comes from the pipes of the pipe coil.
The total regeneration is about 15.5 kW for CVCP model, 23 kW for CVCP/R model, and about 32 kW for CVCP/3R model.
This pump can be installed to all Lamber’s twith Pull-through rack and Belt-towing Dishwashers.
Specifications:
Technical Data CVCP CVCP/R CVCP/3R
COMPRESSOR RATED POWER kW 3.5 kW 5 kW 9
COOLING GAS R134 R134A R134A
OUTPUT AIR TEMPERATURE 18 / 22 C 13 C 13 C
OUTPUT AIR HUMIDITY 45 % 45 % 45 %
LATENT HEAT REDUCTION 90 % 90 % 90 %
COOLING POWER kW 10.55 kW 14.6 kW 24.2
WATER CONNECTION 12 / 15C 12 / 15C 12 / 15C
TOTAL EXCHANGE SURFACE – HOT 21.9 mq 21.9 mq 32.8 mq
TOTAL EXCHANGE SURFACE – COLD 7.28 mq 21.9 mq 43.8 mq
HEATING ENERGY SAVING kW 15.5 kW 23 kW 32
Brand: LAMBER

Get Product Detail